| Type: | Lifter Run-off Switch |
|---|---|
| Model Number: | Tdp-I |
| Relative Humidity: | ≤85% |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier When the belt conveyor, zipper machine, scraper machine, hoist and other transmission machinery fail to run off,misalignment, etc., it can send alarm signals to the microcomputer control system in time or directly stop, effectively protecting equipment and personal safety, avoiding the expansion of accidents, and achieving the purpose of protecting production and equipment. In addition, because the signal can be sent to the microcomputer control system, it is convenient to realize the automatic control of the factory, so it can also achieve the purpose of reducing staff and increasing efficiency, centralized control, and facilitating production and scheduling. Widely used in steel, electric power, chemical industry, cement, coal, metallurgy, building materials, mining, ports and terminals, grain, warehouses and other types of conveying equipment industry.
Working principle:
The tape hoist anti-running switch is installed on the side of the upper and lower left and right wall plates of the tape hoist respectively to detect the run away of the tape. When installed, the rollers are 20-70mm away from the tape and can be adjusted (by the user, generally not to rub the rollers). When deviation occurs, the tape is shifted outward to the rollers, and the rollers drive the adjusting rod to make the deviation switch act to cut off the equipment.
Installation and use:
The switch is balanced on the rack fixing bracket install the switch on both sides of the tape in the right form, connect the two switch pull rings with the wire rope, and use the lifting ring to make the wire rope walk parallel to the tape.Rope pulling action should be appropriate to ensure a reliable switch reset.Multiple pairs of switches can be installed with one tape.Mounting brackets are not supplied with the switch and need tobe purchased separately.
Product Parameters :
| Product Name | Lifter Run-off switch | Model | WKSTDP-I |
| Reset mode: | Automatic reset | Environmental temperature | -30ºC--- +60ºC |
| Relative Humidity | less than 85% | Output signal | Switching signal |
| Current | 5A | Action force | 10kg |
| Reliability | >106 times | Contact capacity | AC220V |
Installation And Use:
1. Anti-deflection switch is generally installed in the upper and lower casing into the drum side of each pair of position at about 1 meter from the center of the upper and lower drum, can also be installed in the central casing near the axillary belt drum as needed (to prevent the tape from swinging too much runaway switch detection errors).
2. When installing the runout switch, the rollers should follow the running direction of the tape.
3. Adjust the installation distance of the roller to allow the tape offset (generally 40 -60mm).
4. After installation, open the back cover, adjust the micro switch cam into the groove, cover the back cover and connect the wires.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}