Product Description
This machine is used for the detection of the material conveyed by the tape conveyor, and can signal the loaded operation. If there is a water sprinkler connected,it can realize the function of automatic water sprinkling on the material. lt can also be applied to the tape machine running in opposite direction.
Working principle:
Type B: The detection device adopts load type detection, when there is material on the tape, the belt has a corresponding sink value due to the weight of the material, when the belt sinks, the top roller of the detector is pressed down, driving the internal sensing parts to move to make the proximity switch work and give a switch value to realize its detection, The detector is installed under the up stream tape, choosing the place where the sink age of the tape is high when there is material. lt is best to installation between two rollers, not near the outlet. When there is no material, the contact wheel should be just in contact with the tape.
Installation use:
Adopt the door type bracket mounting frame, fix the monitor on the beam, the height of the chain ball depends on the site, the switch conversion angle of this device is 20* , the installation angle can be adjusted appropriately for the tape machine with inclination angle, you can choose the broom type or chain type.
| Product name |
Material flow detectors |
Working frequency |
50hz |
| Product model |
LL-III |
Ambient Temperature |
-30°C-+75°C |
| Relative humidity |
≥85% |
Contact capacity |
AC380V 5A |
| Number of contacts |
1NO 1NC |
Angle of action |
20°(Two way) |
){kind=link}
){kind=link}