| Customization: | Available |
|---|---|
| Product Name: | Automatic Longitudinal Tear Switch |
| Movement Power: | 5kg |
|
Still deciding? Get samples of US$ 46/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Slit swiches provide an alarm signal to the monitor or shut down the conveyor in case of tears, punclures, damaged juncions or sharp objects protruding from the belt. The rip switches are mounted in pairs on both sides of the conveyor belt. They are connected by two sections of wire rope. One end of the wire rope is fixed to the support bracket and the other end is attached to the pull ring of the rip switch, The two sections of wire rope form a monitoring surface under the conveyor belt, When an object ortorn bel is suspended down and swept down to the wire rope, the wire rope puls the tear switch pull ring to make it move and the tear switch sends out an alarm or stop signal.
Working principle:
When an emergency occurs on the belt transport site, pull the aviation wire rope tied to the lifting lug to make the slider in the machine with the switch, and issue the stop signal, After loosening the wire rope, the switch automatically reset.
Installation and use:
The switch is balanced on the rack fixing bracket.
Install the switch on both sides of the tape in the right form, connect the lwo switch pul rings with the wire rope, and use the lifting ring to make the wire rope walk parallel to the tape.Rope pulling action should be appropriate to ensure a reliable switch reset.Multiple pairs of switches can be installed with one tape.Mounting brackets are not supplied with the switch and need to be purchased separately.
| Product Name | Automatic Longitudinal Tear Switch(Gray) | Model | Tear switch TB-100 |
| Movement Power | 5KG | Ambient temperature | -30°-+60°C |
| Ultimate Stroke | 25mm | Number of contacts | 2 Micro Switch |
| Action Stroke | 20mm | Relative humidity | ≥85% |
| Reset Mode | Automatic Reset | Contact capacity | AC380V 5A |
){kind=link}