| Customization: | Available |
|---|---|
| Protection: | IP65 |
| Max. Voltage: | 24-380V |
|
Still deciding? Get samples of US$ 80/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Overview:
When the belt conveyor, zipper machine, scraper machine, hoist and other transmission machinery fail to run off,
misalignment, etc., it can send alarm signals to the microcomputer control system in time or directly stop, effectively
protecting equipment and personal safety, avoiding the expansion of accidents, and achieving the purpose of protecting
production and equipment. In addition, because the signal can be sent to the microcomputer control system, it is convenient
to realize the automatic control of the factory, so it can also achieve the purpose of reducing staff and increasing efficiency,
centralized control, and facilitating production and scheduling. Widely used in steel, electric power, chemical industry, cement,
coal, metallurgy, building materials, mining, ports and terminals, grain, warehouses and other types of conveying equipment
industry.
Working principle:
The tape hoist anti-running switch is installed on the side of the upper and lower left and right wall plates of the tape hoist
respectively to detect the runaway of the tape. When installed, the rollers are 20-70mm away from the tape and can be
adjusted (by the user, generally not to rub the rollers). When deviation occurs, the tape is shifted outward to the rollers,
and the rollers drive the adjusting rod to make the deviation switch act to cut off the equipment.
Product Parameters :
| Product Name | Lifter Run-off switches | Model | WKSTDP-III |
| Reset mode: | Automatic reset | Environmental temperature | -20ºC--- +60ºC |
| Relative Humidity | less than 85% | Output signal | Switching signal |
| Current | 5A | Action force | 10kg |
| Reliability | >106 times | Contact capacity | AC220V |
Installation And Use:
1. Anti-deflection switch is generally installed in the upper and lower casing into the drum side of each pair of position at
about 1 meter from the center of the upper and lower drum, can also be installed in the central casing near the axillary belt
drum as needed (to prevent the tape from swinging too much runaway switch detection errors).
2. When installing the runout switch, the rollers should follow the running direction of the tape.
3. Adjust the installation distance of the roller to allow the tape offset (generally 40 -60mm).
4. After installation, open the back cover, adjust the micro switch cam into the groove, cover the back cover and connect
the wires.
Product Display:
){kind=link}