Product Description
This machine is used on belt conveyors to prevent serious accidents caused by slippage. lt can also be used for chain startingand stopping of multiple belt conveyors, low speed holding or over speed protection, etc., making the operation on site simpleand improving safety. lt is widely used in industries with belt conveyors such as steel, electric power, coal mines and ports.
Working principle:
This product is used within the working vollage range of AC220V +10%, 50Hz, the speed range is 20-999R/MIN, output stale:NC type. When out of the wheel (from the disk) with the tape machine running and drive the inner pulse disk, in the pulse diskrotalion sensor maqnelic should signal inpul to the control circuit, by trigger amplificalion output, and then count, its count value and preset number comparison, to judge the tape belt speed, namely: normal speed, skidding speed, overspeed speed, et.. Atthe same time, the corresponding switch signal is output from the execution circuit to achieve the monitoring purpose.
Product Parameters :
| Product Name |
Slip switch III |
Model |
DH-III |
| Belt speed |
1.6 m/s customize |
Ambient temperature |
-20°-+60°C |
| Output Type |
Dry contact output AC 380V 5A or DC 12-50V 5A as the output is a solid state relay.specify forDCor AC conditions (for negative or inductive loads) |
Output state |
NC type |
| Speed range |
20-999R/MIN |
Relative humidity |
≥85% |
| Number of contacts |
1NO 1NC |
Working voltage |
AC220V |
Installation And Use:
The fixed bracket is first welded to the conveyor beam; then the support arm is connected to the bracket with pins and cotter pins to meet the following requirements: the slip detector device is placed in the direction of the running of the tape and the contact wheel is 200-300MM from the edge of the tape.
){kind=link}
){kind=link}