| Customization: | Available |
|---|---|
| Model No.: | Wksll-III |
| Switch Potency: | AC/DC24-380V |
|
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Overview:
This machine is used for the detection of the material conveyed by the tape conveyor, and can signal the loaded operation.
If there is a water sprinkler connected, it can realize the function of automatic water sprinkling on the material. It can also
be applied to the tape machine running in opposite direction.
Working principle:
Type B: The detection device adopts load type detection, when there is material on the tape, the belt has a corresponding
sink value due to the weight of the material, when the belt sinks, the top roller of the detector is pressed down, driving the
internal sensing parts to move to make the proximity switch work and give a switch value to realize its detection. The detector
is installed under the upstream tape, choosing the place where the sinkage of the tape is high when there is material. It is
best to install it between two rollers, not near the outlet. When there is no material, the contact wheel should be just in
contact with the tape.
Product Parameters :
| Product Name | Material flow detector | Model | WKSLL-III |
| Reset mode: | Manual and automatic reset | Environmental temperature | -30ºC--- +60ºC |
| Relative Humidity | less than 85% | No. of contacts | 1NO1NC /2NO2NC |
| Action Angle | 30° | Action force | 10kg |
| Limit Angle | 60° | Current | 1.5A |
| Reliability | >106 times | Contact capacity | AC380V /DC220V |
Installation And Use:
Adopt the door type bracket mounting frame, fix the monitor on the beam, the height of the chain ball depends on the site,
the switch conversion angle of this device is 20° , the installation angle can be adjusted appropriately for the tape machine
with inclination angle, you can choose the broom type or chain type.
Product Display
Q1: Would you accept OEM/ODM ?
A1: Yes,we accept.OEM/ODM has a MOQ requirement.
Q2: Can we get samples ?
A2: Yes,you can get sample to test quality,but the freight for express is on buyer's account.
Q3: What's the payment term ?
A3:T, Western Union, MoneyGram,Paypal etc.
Q4: How's the delivery time ?
A4: Normally is 3-10 work days, lf the quantity is large,We need to negotiate.
Q5: What is the standard of package ?
A5:Normally are cartons, but also we can pack it according to requirement.
Q6: Could you offer Form E, C/O etc ?
A6: Sure, We can apply to CCPIT.
Q7: Are you a trading company or a manufacture ?
A7:We are the manufacturer& exporter in the industry so we can supply product for you with factory price.
){kind=link}