Explosion-Proof Stainless Steel Manual Bidirectional Rope Switch Bklt2-Ll 1no 1nc /2no 2nc

• Product Name: Explosion-Proof Pull Cord Switch
• Model: Bklt2-Ll
• Angle of Action: 30°
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: BKLT2-ll
• Limit Angle: 60°
• Reset Mode: Automatic/Manual Reset
• Transport Package: Carton
• Specification: 5kg
• Trademark: VKSELE
• Origin: Zhejiang, China
• Package Size: 25.00cm * 20.00cm * 15.00cm
• Package Gross Weight: 5.000kg

Product Description

Product Description

This machine is used for emergency stops in the event of an accident at a tape transport site.
Working principle:
When an emergency occurs at the belt transport site, pull the wire rope tied to the lifting lug to make the slider and switch in the machine function and send out a stop signal, Release the wire rope and press the reset bar before the reset.
Product Parameters :

Product Name	Explosion-proof Pull Cord Switch	Model	BKLT2-ll
Angle of action	30°	Ambient temperature	-30°-+60°
Limit Angle	60°	Reset Mode	Automatic/Manual Reset
Action force	10KG	Relative humidity	≥85%
Number of contacts	1NO 1NC /2NO 2NC	Contact Capacity	AC380V 10A

Installation And Use:
The switch is balanced on the fixing bracket of the frame:Tie the wire rope to the pull ring at the upper and lower ends of theThe rope pressure should be suitable to ensure the reliable reset of the switch;The pulling rope is arranged in the parallel direction of the tape, and a lifting ring is added every 3 meters;pull rope switch, and the wire rope on each side shall not exceed 40m(it shall be shortened to 25 meters when there is a slope):