Pull Cord Switch Sps-2D SRS-2D Ros-2D Pull Cord Switch Square Ramsey

• Protection: IP65
• Max. Voltage: 24-380V
• Action Angle: 30°
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: SPS-2D
• Ambient Temperature: -30~+60ºC
• Switch Potency: AC/DC24-380V
• Transport Package: Carton
• Specification: SPS-2D
• Trademark: VKSELE
• Origin: Wenzhou
• Production Capacity: 1000pieces/Week
• Package Size: 25.00cm * 22.00cm * 15.00cm
• Package Gross Weight: 5.000kg

Product Description

Overview:

This machine is used for emergency stopping of the tape conveyor in case of accident. The switch is a two-way contact
The switch is a two-way contact type, the - end is fixed in the rope pulling bolt, the other end is fixed in the switch arm, the
distance from the switch to the fixed The distance from the switch to the fixed point is not more than 25 meters, and the
distance between switches is not more than 30 meters, when the external force prompts When the switch arm rotates to
the position of alarm "stop", the switch will be locked, and the machine is manually reset. This machine is a manual reset
model, press the limit lever to reset after troubleshooting.

 

Product Parameters :

Product Name	Square pull rope switch	Model	SPS-2D/SRS-2D
Work Voltage	AC220V 50/60Hz	Environmental temperature	-30ºC--- +60ºC
Relative Humidity	less than 85%	No. of contacts	2NO2NC
Movement Angle	30°	Movement power	8-12±2kg
Reliability	106 times	Reset method	Manual
Extreme Angle	60°	Contact capacity	AC/DC24-380V

 

Structure characteristics:

The switch is made of high quality travel switch, with long use mission. Good sealing, with Dustproof, shockproof, 
anti-corrosion, etc. The housing is made of cast aluminum, with light weight and strong hardness.

Installation And Use:

The switch is balanced on the fixed bracket of the frame; tie the wire rope to the pull ring at the upper and lower ends of 
the pull rope switch, the wire rope on each side should not exceed 30 meters (should be shortened when there is a slope); 
the pull rope pressure should be appropriate to ensure the reliable reset of the switch; the pull rope is set along the parallel 
direction of the tape, and a hanging ring is added every 10 meters.