Iron Chain Type Material Flow Detectors Switch

• Protection: IP65
• Max. Voltage: 24-380V
• Action Angle: 30°
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: WKSLL-I
• Ambient Temperature: -30~+60ºC
• Switch Potency: AC/DC24-380V
• Transport Package: Carton
• Specification: WKSLL-I
• Trademark: VKSELE
• Origin: Wenzhou
• Production Capacity: 1000pieces/Week
• Package Size: 35.00cm * 25.00cm * 22.00cm
• Package Gross Weight: 5.000kg

Product Description

Overview:

This machine is used for the detection of the material conveyed by the tape conveyor, and can signal the loaded operation.
If there is a water sprinkler connected, it can realize the function of automatic water sprinkling on the material. It can also
be applied to the tape machine running in opposite direction.

 

Working principle:
Type B: The detection device adopts load type detection, when there is material on the tape, the belt has a corresponding
sink value due to the weight of the material, when the belt sinks, the top roller of the detector is pressed down, driving the
internal sensing parts to move to make the proximity switch work and give a switch value to realize its detection. The detector
is installed under the upstream tape, choosing the place where the sinkage of the tape is high when there is material. It is
best to install it between two rollers, not near the outlet. When there is no material, the contact wheel should be just in
contact with the tape.

 

Product Parameters :

Product Name	Material flow detector	Model	WKSLL-I
Reset mode:	Manual and automatic reset	Environmental temperature	-30ºC--- +60ºC
Relative Humidity	less than 85%	No. of contacts	1NO1NC /2NO2NC
Action Angle	30°	Action force	10kg
Limit  Angle	60°	Current	1.5A
Reliability	>10^6 times	Contact capacity	AC380V /DC220V

Installation And Use:

Adopt the door type bracket mounting frame, fix the monitor on the beam, the height of the chain ball depends on the site,
the switch conversion angle of this device is 20° , the installation angle can be adjusted appropriately for the tape machine
with inclination angle, you can choose the broom type or chain type.
Product Display: