Product Description
Pull cord switch is widely used in iron and steel, cement, power plants, mines and other factories with belt conveyor, The productis installed on both sides of the be conveyor, is a kind of protective switch for emergency shut down of the belt conveyor, pull the wire rope at any point within the operating dislance of the switch, cut off the running circuit to stop the whole line, to achieve the protection of the beit conveyor and personal safety.
Working principle:
When an emergency occurs at the tape transport site, the wire ropetied to the lug of the pull rope switch can be pulled to make the silder in the machine act with the switch to signal a stop. The wire rope is released and automatically reset.
Product Parameters :
| Product Name |
Junction box rope switch |
Model |
XLLS-J-II |
| Angle of action |
30° |
Ambient temperature |
-30°-+60° |
| Limit Angle |
60° |
Reset Mode |
Manual Reset |
| Action force |
10KG |
Relative humidity |
≥85% |
| Number of contacts |
1NO 1NC /2NO 2NC |
Contact Capacity |
24-380V AC/DC 1:5A |
Installation And Use:
The switch is balanced on the fixing bracket of the frame:Tie the wire rope to the pull ring at the upper and lower ends of theThe rope pressure should be suitable to ensure the reliable reset of the switch;The pulling rope is arranged in the parallel direction of the tape, and a lifting ring is added every 3 meters;pull rope switch, and the wire rope on each side shall not exceed 40m(it shall be shortened to 25 meters when there is a slope):
){kind=link}
){kind=link}